The alternative: EFS 350 S/EL (formerly: EFS 180 E)
Universal machine with chassis
The EFS 180 E with chassis is easy to handle, robust and simple to transport.
The infinitely variable guide handle with chassis can be adjusted to the height of any operator in seconds.
The machine is easy to guide, the plates and brushes can be exchanged without effort using a quick coupling.
And finally thanks to its infinitely variable speed control this machine can be employed for a whole range of tasks.
||230 V / 50 Hz AC
||60 - 200 rpm,
||23,5 kg (without accessories) plus 4 add-on weights each weighing 5 kg*
||gear unit: 110 mm
motor: 230 mm
||400 mm - 560 mm
|length: 110 cm
width: 45 cm
|Scope of delivery: Machine complete with chassis, guide handle, 15 m tear-resistant PU safety cable, dust extraction outlet
*order as a special accessory if required
Areas of application
- For compacting, planing, filling in surface irregularities, abrading, grinding, cleaning and keying screed
- On industrial flooring, skim coats: for applying primer, for planing and levelling sloping floors or edges, for compacting and planing synthetic resin flooring
- For intermediate sanding, waxing and polishing on parquet and cork floors
- For keying filler and anhydride self-levelling screed
- For removing surface residue and blemishes
Star screw for removing the chassis from the machine
Connector cable with right-angle plug
Outlet for dust extraction
Protective rubber ring on the housing
Automatic start interlock to prevent the machine being switched on unintentionally
Infinitely variable speed control
Double strain relief, 15 m tear-resistant cable with an excess-current circuit-breaker
Clamp lever to infinitely adjust the guide handle
Maintenance-free, long-life belt drive smooth-running chassis
Tools and accessories EFS 180 E with chassis
A selection of available tool plates:
Drive plate with hook and loop surface for various pad discs and sanding screens
Grinding plate with flexible base for double-sided sand paper and carbide grinding discs
Diamond drive plate buffered, Ø 400 mm, with various tools, e.g. 3 diamond grinding discs, Ø 125 mm for large surface coarse grinding of screed, concrete, etc.
Various brushes for a range of tasks: cleaning, waxing, polishing etc.
Flat wire steel brush (oil hardened): for cleaning concrete floors and paving stones, or applying primer
Grinding ring, 16 grit:
for grinding coarse screed and concrete surfaces.
Multiorbiter with 3 or 5 hook and loop-backed plates for flexible grinding discs, Ø 125 mm
Milling plate with solid carbide cutters WCT for the removal of stubborn filler or adhesive residue, etc.
Planing disc, Ø 600 mm, with 8 hardened steel trowels
Steel planing disc Ø 600 mm: for compacting, planing, levelling screed, concrete etc.
Plastic planing disc
Ø 600 mm for compacting and planing epoxy resin screed and light-coloured mineral screeds
Diamond drive plate buffered, Ø 400 mm, for various tools; e.g. 6 trapezium-shaped diamond tools for coarse sanding of screed, concrete, etc.
Special accessories: (not included in the standard scope of delivery)
The bracket fixture including 4 additional weights, each weighing 5 kg is available as a special accessory for specialised jobs. The grinding pressure during work can be increased by adding these weights. The machine can thus be adapted to suit individual tasks.
Dust protection ring
When used in conjunction with an industrial dust extractor, the dust protection ring ensures that work is almost dust-free. Stainless steel ring with exchangeable clip-on brush.