| Technical Details | |
| Voltage | 230 Volt |
| Power | 1,4 kW |
| Speed | 4.000-9.000 min-1 |
| Cutting disk | Ø 150 mm |
| Cutting depth | 40 mm max. |
| Holding flange | 27 mm |
| Cutting width | 20 mm max. |
| Cutting groves | 25 mm max. |
| Dust extraction connection | Ø 38 mm |
| Weight | 9,3 kg |
Scope of delivery
HFS 150, part no. 032.300
Machine with cutting disc 'Concrete' Ø 150 mm, dust protection guard, depth control stop, distance washers, antivibration grip, assembly tools. All supplied in a transport systainer.
The HFS 150 is a handy, movable and stable joint cutter for cutting in floors with and without chamfer.
Einsatzgebiete:
- Cutting in screed and concrete
- Recutting joints
- Chamfering existing joints (on one or on both sides
- Cutting joints open and chamfering simultaneously
Tools and accessories for hand-held joint cutter HFS 150
1. Diamond cutting disc 'Abrasives' Ø 150 mm
Part no 232.304
10 mm segment height,
bore hole 22,23 mm,
with core protection segment,
for epoxy mortar, screeds and coatings
2. Diamond cutting disc 'Concrete' Ø 150 mm
Part no 239.158
10 mm segment height,
bore hole 22,23 mm,
for concrete, reinforced concrete aggregate concrete, common construction material
3. Diamond cutting disc 'Twister Plus 12'
Ø 150 mm
Part no. 232.305
12 mm segment height, bore hole 22,23 mm, long service life, self-cooling,
for concrete, hard old concrete, reinforced
concrete, industrial screeds, roof tiles, hard clinker, medium hard clinker, aggregated
conrete, general purposes, granitee
4. Chamfer disc FF-90
Ø 130 mm
Part no. 233.125
Bore hole 22,23 mm,
max. 7 mm wide chamfer for chamfering joints of concrete and screed,
chamfering on one side = one chafer disc + cutting disc(s),
chamfering on both sides = two chamfer discs + cutting disk(s)
5. Truing stick silicon carbide
Part no. 332.484
for truing chafer disk FF-90
6. Vulkollan® Set
Part no. 332.001
for dust extraction hood
1 x Vulkollan® lip seal (36 x 40 x 2 mm)
1 x clamping plate (35 x 15 x 1 mm)
2 x blind rivet 4 mm
7. Distance washer thick
Ø 48,5 x 5 mm
Part no. 332.501
For positioning and tightening the cutting discs on the holding flange
8. Distance washer thin
Ø 48,5 x 2,5 mm
Part no. 332.500
For positioning and tightening the cutting discs on the holding flange
9. Distance washer
Ø 36 x 1 mm
Part no. 332.502
For mounting between the cutting discs if cutting wide joints with several cutting discs